The Degreaser is a highly concentrated, water-soluble, biodegradable, organic solvent intended for the loosening of grease, dirt, tar, tree saps, road debris, and oils from vehicle surfaces. Effective at removing contaminants from metallic, plastic, rubber, gel coated, and painted components. Designed to be safe and effective for use on Aviation, Automotive, Marine, RV, Motorcycle, and Commercial vehicles. Tailored for cleaning heavily soiled areas including the engine bay, undercarriage, wheel wells, rims, tires, inner hull, and fuselage cavities.
It removed all the dirt, sand, tar and oil with minimal effort, leaving the tire looking brand new and the wheel sparkling clean. Will buy again!
I used this product on the belly of my airplane and it cleaned the grime off well.
If you're unsatisfied with any of our products for ANY reason, just let us know and we'll gladly refund you the full purchase price.
No questions asked.
Cover surfaces and electrical components that may become damaged from contact with water during the degreasing process. It is advised not to let the Degreaser dry on surfaces. First, if able, rinse areas with water to remove loose debris from the surfaces to be cleaned. Spray the Degreaser onto the soiled surfaces and a detailing brush or damp sponge. Use the detailing brush or sponge to agitate the grime from surfaces and components, applying additional Degreaser as needed during the cleaning process. After degreasing, rinse the surfaces clean with water before drying. Dry the cleaned surfaces as needed with microfiber towels or pressurized air.
The Degreaser is also safe to be used on interior surfaces as needed when diluted to a 10:1 (water : product) ratio. Our Interior Lather, however, is specifically designed and formulated with a unique chemical structure for the use on interior surfaces and should be used on interior surfaces instead of Degreaser when able. When detailing within the confines of an interior space, it is best to apply the product to the surface utilizing an applicator (detailing brush or sponge) rather than spraying the product directly onto the surface to be cleaned to prevent overspray onto other surrounding surfaces